Curtis G4 CGC Series User Manual page 22

PROGRAMMING GUIDE
Automatic Programming - USB
IMPORTANT:
starting the following process.
Uploading the Software to the Flash Drive
1
as desired.
2
Downloading the Software to the Brewer from the Flash Drive
1
2
3
a second.
4 Once the download is complete, the UCM will reboot so that the changes take effect.
USB File Transfer
procedure will be started before the screen is shown.
FILE TRANSFER
Upload
to USB
Settings/recipes
Present on USB
Screensaver
Not present on USB
PG34
Download
No Action
from USB
Start
NC