Curtis G4 CGC Series User Manual page 16

PROGRAMMING GUIDE
Touchscreen Control Module Overview
functions. The default screen, as well as additional control buttons are shown below.
There are two methods for changing the default settings on G4 brewers. The settings can be programmed
port on the side of the brewer (see Automatic Programming - USB).
Status lights
Home
Manual Programming Mode
1
2 The ACCESS CODE screen will appear. The
default pass code is 1 2 3 4. Once the code is
entered, press OK. The MAIN MENU screen will
appear. The access code can be reset in the
Control Settings sub-menu, under Passwords.
Undo Curtis logo
3
Display view varies
with model
20
oz
16
oz
12
oz
Scroll Return to
previous
left/right
The MAIN MENU screen contains a series of sub-
selected under the Model Select sub-menu. For
must match the model series on the brewer model
PG34
Brew Buttons
Control symbols - all
symbols may not be
present at the same
time
NC