ETC ColorSource Quick Manual page 4

ETC Quick Guide
ColorSource Relay and Wireless DMX Transmitter
Specifications
Note:
Input Voltage: 90-250V; 47-63hz
Switching Current: 2 pole; 16A max
CE and FCC compliant
Wireless Latency: 7mS
Wireless Output Power: up to
72mW ETSI broadcast power
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including any
interference that may cause undesired operation.
Contains: FCC ID: VU65792M
Contains: IC ID 7480A5792M
EU Declaration of Conformity
This product complies with the Essential requirements of the R&TTE Directive
of the European Union (1999/5/EC)
This product conforms to the following standards:
ETSI EN 300 328 V1.8.1 (2012-06), EN 301-489-1 V1.9.2 (2011-09), EN 301-
489-17 V2.2.1 (2012-09)
ColorSource Relay and Wireless DMX Transmitter
Only connect this equipment to branch protected circuits of 20A or
less.
Environmental: 0-40°C; 5-95% humidity
Mechanical Endurance: 1,000,000 cycles
Wired Data Output: DMX512A and RDM
Wireless Band: 2.4GHz FHSS
Electrical Endurance:
100,000 @16A 250V Resistive
20,000 @ 20A 250V Resistive
100,000 @ 6A 277V Inductive
20,000 @12A 277V Electronic
Page 4 of 4 Electronic Theatre Controls, Inc.