GLW MC 25 Operating Manual page 52

RETOOLING
1. Prepare the retooling
Disconnect the mains supply from the
mc 25 and open cover.
 Read counter if required.
 Turn off the mc 25 with mains switch (1).
 Disconnect mains cable (2).
 Slide back the cover (3).
 Pull the pin (4) upwards and pull out the end
sleeves (5).
 Remove the dispenser (6) and roll up the
remaining end sleeves.
 Fold back the dispenser holder (7).
2. Remove the tool insert
 Pull out the bolt (1).
 The tool insert (2) must be removed sideways.
 Put the tool insert and the bolt into the
accessories box.
14
Diagram 16 Prepare the retooling
Diagram 17 Remove the tool insert
10/12