GLW MC 25 Operating Manual page 50

OPERATION
1. Prepare the cable
 Before crimping cable must be aligned as
straight as possible.
2. Cut the cable
 Cut the cable clean and straight.
Poor cut (Diagram 11) frequently
!
results in unsuccessful crimping.
3. Start the mc 25
 Check that the cover (1) is closed.
 Turn on (position I) the mc 25 with the mains
switch (2).
 Check that counter (3) is at 0.
If the counter is not at 0 refer to
!
chapter faults.
12
Diagram 9 Prepare the cable
Diagram 10 Cutting cable
Diagram 11 Poor cut
Diagram 12 Start the mc 25
10/12