Operation - Toro Workman GTX Series Installation Instructions Manual

Operation

Installing a Spreader onto the
Walk-Spreader Mount
1. Walk the spreader up the spreader ramps.
2. Engage the spreader axles using the axle holders
(Figure 14).
Figure 14
1. Axle holders
3. Align the kickstand on the spreader between the
kickstand-retention tabs on the spreader-mount frame
(Figure 15).
4. Secure the spreader to the spreader-mount frame using
a snap pin (Figure 15).
Figure 15
1. Kickstand-retention tabs 2. Snap pin
7