LENCO L-92 User Manual page 14

Turntable Section:
Type:
Motor:
Driving Method:
Turntable Platter:
Speeds:
Wow and Flutter:
S/N Ratio:
Pitch Controls:
Starting Torque:
Braking System:
Starting Time:
Braking Time:
Time for Speed Change:
USB Function:
Computer interface:
Tonearm section:
Type:
Effective Arm Length:
Overhang:
Tracking Error Angle:
Tracking Force Adjustment Range:
Cartridge MM Type:
Stylus pressure:
Cartridge weight:
Anti-skating Range:
Channel Separation:
Channel Balance:
Pre-Amplifier
Output:
RIAA (Frequency Response):
Power supply adaptor
Use only the power supply listed in the user instructions
2-speed full manual
Miniature permanent magnet DC brushes
Belt drive
332mm (Aluminum)
33 and 45rpm
Less than 0.3% WRMS (JIS WTD) with 33 rpm
More than 50dB (DIN-B)
+/- 50%
N/A
Electronic brake
Less than 2 sec.
Less than 2sec.
Less than 2 sec. from 33 to 45 rpm.
Less than 2 sec. from 45 to 33 rpm.
PC link (recording from turntable to computer by USB port)
USB 1.1 compliant 7/8/10 or MAC OSX
Static balanced S-shaped tone arm
200mm
10mm
Less than 3 degree
3-4g
Audio Technica AT-3600L
3.0±0.5g
2.5±0.5g
0~4g
More than 18 dB
Within 2.5dB at 1KHz
150mV +/-4dB (IN: 2.5mV 1KHz)
20Hz~20KHz +1/-3dB (IN: 1.5mV 1KHz)
14