Auto Image Rotation - Canon EOS 1D Mark II N Instruction Manual

3

Auto Image Rotation

Vertical shots can be rotated automatically so that they are displayed
upright during playback.
Auto rotate will work only with vertical images captured while
[Auto rotate] was [On]. Auto rotate will not work with vertical
images captured while [Auto rotate] was [Off].
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
When you change the camera's orientation between horizontal and vertical,
the camera orientation sensor will make a small sound. This is not a defect.
118
1
Select [Auto rotate].
Select the <
Hold down the <
5
the < > dial to select [Auto rotate].
Then let go of the <
2
Select the desired setting.
Hold down the <
turn the <
Then let go of the button.
3
Take a vertical shot.
For the image review right after image
capture, the image will not be displayed
vertically on the LCD monitor.
4
Playback the image.
Press the <
The vertical shot will be displayed
vertically as shown on the left.
c
> tab.
X
> button and turn
X
> button.
X
> button and
5
> dial to select [On].
V
> button.