Custom White Balance - Canon EOS 1D Mark II N Instruction Manual

3

Custom White Balance

With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
1
Photograph a white object.
Make sure the plain, white subject fills
the entire center spot metering circle.
Set the lens focus mode switch to
g
< >, then focus manually. (p.90)
Set any white balance setting. (p.64)
Shoot the white object so that a
standard exposure is obtained. If it is
underexposed or overexposed, a
correct white balance setting might
not be obtained.
2
Select [Custom WB].
Select the <
Hold down the <
turn the <
WB]. Then let go of the button.
The 9-image index display will
appear.
3
Select the image.
Hold down the <
turn the <
you shot in step 1. Then let go of the
button.
z
> tab.
X
> button and
5
> dial to select [Custom
X
> button and
5
> dial to select the image
65