Changing The Focusing Screen - Canon EOS 1D Mark II N Instruction Manual

Changing the Focusing Screen

You can change the camera's focusing screen to better suit the subject
or shooting situation. You must also set C.Fn-00 so that the standard
setting for obtaining a correct exposure matches the focusing screen.
Focusing Screen Type
k
:New Laser-matte
l
:Laser-matte
p
:Super precision matte
C.Fn-00 cannot be registered in any Custom Function group.
If you do not change the focusing screen that came with the camera, you
need not change C.Fn-00-1 factory setting.
To change the focusing screen, refer to the instructions that came with
the focusing screen.
The Ec-A, Ec-B, Ec-I, and Ec-L focusing screens have a prism at the
center. A correct exposure reading cannot be obtained with evaluative
metering or spot metering based on the center area where there is a
prism. Use center-weighted averaged metering or off-center spot
metering with such focusing screens.
180
Designation
Ec-N, Ec-R
Ec-series (A, B, C, CII, CIII, D, H, I, L)
Ec-S
1
Select C.Fn-00.
Hold down the <
turn the <
let go of the button.
Hold down the <
turn the <
desired setting. Then let go of the
button.
2 Check the message.
Hold down the <
turn the <
Then let go of the button.
C.Fn-00 Setting
X
> button and
5
> dial to select [00]. Then
X
> button and
5
> dial to select the
X
> button and
5
> dial to select [OK].
0
1
2