Starting Remotecapture - Canon EOS 1Ds Software Instructions

Starting RemoteCapture

Double-click the [Canon Utilities] folder s the [RemoteCapture]
1
folder s [RemoteCapture] to start.
\
A message appears prompting you to connect the camera to your computer.
2
Click the [Connect] button.
\
The Save window and Shooting
window appear.
●
To exit RemoteCapture, click the [Disconnect] button and select [Exit] from the [File]
menu.
When you are using mirror lockup to take pictures, there is a delay of approximately 2
seconds after you click the RemoteCapture [Release] button before the picture is
actually taken.
Selecting [Camera Setting] from the [File] menu allows you to specify the camera
settings. For information on how to specify the camera settings, see Chapter 4
"Specifying Camera Settings from Your Computer".
5-2