Starting File Viewer Utility - Canon EOS 1Ds Software Instructions

Starting File Viewer Utility

1
Double-click the [Canon File Viewer Utility] icon on the desktop to
start.
● You can also start File Viewer Utility by double-clicking the [Canon Utilities] folder s
the [File Viewer Utility] folder s the [File Viewer Utility] icon.
\
File Viewer Utility starts, and the [Select model-specific processing mode] dialog box
appears.
2
Click the [EOS-1DS] checkbox and then click the [OK] button.
\
The File Viewer Utility main window
appears.
●
The selected camera model is
added to the [Model-specific
processing mode] list box (➞3-7)
as a model-specific processing
mode to be used when you perform
processing that is unique to each
camera.
If you have not clicked the [EOS-1DS] checkbox in the procedure above, display the
[Select model-specific processing mode] dialog box from [Registered model-specific
processing mode] (➞3-40) in the [General Settings] tab sheet in the [Preferences]
dialog box, and click the [EOS-1DS] checkbox.
The [Select model-specific processing mode] dialog box appears only when File
Viewer Utility starts for the first time after installation. It does not appear when File
Viewer Utility starts the second time or later.
3-2