Canon EOS 1Ds Software Instructions page 70

Personal Function Settings
3
Set up the Personal Function.
●
Select the settings you want to set by clicking the checkboxes for the respective
items. Then use the appropriate method to specify the remaining settings using the
radio buttons, list boxes, checkboxes and number input boxes.
Checkbox
●
If you enter a numerical value, values outside the valid range of settings are ignored.
●
Clicking the [Load Settings] button replaces the settings with the Personal Function
settings on the camera.
4
Repeat steps 2 and 3 to set up additional Personal Functions.
5
Apply the Personal Function Settings to the camera.
●
Clicking the [OK] button applies the
specified settings to the camera
and closes the [Personal Function
Settings] dialog box to end the
procedure.
●
Clicking the [Apply] button applies
the specified settings to the camera
without closing the [Personal
Function Settings] dialog box.
\
When a Personal Function is
applied to the camera, <
appears on the LCD panel.
When you press the [Reset] button, the Personal Function Settings parameters are
reset as follows:
• The checkboxes are cleared.
• The radio buttons, list boxes and number input boxes revert to the default values.
4-8
>