Setting The Parameters - Canon EOS 1Ds Software Instructions

Setting the Parameters

You can set the parameters for captured images on the camera. You can register up to 3
parameters on the camera, consisting of the JPEG image quality settings, the sharpness
settings and the tone curve data saved during the procedure described in "Adjusting the Color
and Brightness (Adjust Tone Curve)" (➞3-22). For JPEG images, all the parameters are
applied. For RAW images, only the tone curve data and sharpness setting are applied.
For more information on setting the parameters on the camera, see "Setting the Processing
Parameters" in the EOS-1Ds Instructions.
Setting the Parameters
1
Click the [Parameters] button.
\
The [Parameters Settings] dialog box appears.
Click this button to close the
[Parameters Settings] dialog box.
Registers the settings on the camera.
Selects the tone curve. (➞4-28)
Opens the [User-Defined Tone
Curve] dialog box and
registers the user tone curve
on the camera. (➞4-26)
Sets the sharpness intensity.
(➞4-28)
Sets the sharpness object.
(➞4-28)
Sets the compression rate for
Fine JPEG image quality. (➞4-28)
Sets the compression rate for
Normal JPEG image quality.
(➞4-28)
4-25