Frequently Asked Questions, Causes And Measures; Accessories; Service And Repair; Warranty - Leister WELDY foiler Operating Manual

10. Frequently asked questions, causes and measures

Poor quality welding result:
• Check the drive speed and welding temperature.
• Clean the welding nozzle (3) with a wire brush.
• Welding nozzle (3) set incorrectly (see Setting the welding nozzle)
The required welding temperature has still not been reached after a maximum of 5 minutes:
• Check the line voltage.

11. Accessories

Only genuine Weldy spare parts and accessories may be used. Failure to use such spare parts and accessories will
invalidate the warranty and guarantee.
For more information, go to www.weldy.com

12. Service and repair

Repairs may only be carried out by local Weldy partners. Only genuine accessories and spare parts may be used.
For more information, go to www.weldy.com.

13. Warranty

• The guarantee or warranty rights granted for this device by the direct distribution partner/salesman apply after the
date of purchase.
• In the event of a guarantee or warranty claim (verification by invoice or delivery note), manufacturing or processing
errors will be rectified by the sales partner through replacement delivery or repair.
• Other guarantee or warranty claims are excluded within the framework of mandatory law.
• Damages resulting from natural wear, overload, or improper handling are excluded from the warranty.
• Heating elements shall be excluded from warranty obligations or guarantees.
• No guarantee or warranty claims exist for devices which have been converted or changed by the purchaser or for
which non-original Weldy spare parts have been used.

14. Declaration of conformity

Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland confirms that this product
fulfils the requirements of the following EU Guidelines in the models that we have made available for purchase.
Guidelines:
Harmonized standards:
Name of the authorized document official: Volker Pohl, Manager Product Conformity
Kaegiswil, 08/31/2017

15. Disposal

Never dispose of electrical equipment with household refuse!
Electrical equipment, accessories, and packaging should be subjected to environmentally
friendly recycling.
28
2006/42, 2014/30, 2014/35, 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO Christoph Baumgartner, GM