Setup And Connection; Setup Location; Speaker Cables - Teufel Impaq 6000 Technical Description And Operating Instructions

5.1 complete system with dvd preceiver, multichannel subwoofer, four column speakers and one center speaker
Table of Contents

Advertisement

Setup and connection

Connection scheme for DVD preceiver and subwoofer with speakers and television

Setup location

Select a stable, level base.
Make sure that the environment is clean and free from
dust.
Avoid placing the unit close to sources of heat or in
direct sunlight.
Arrange the connector cables so that they do not pose
a trip hazard.
Do not place any heavy objects on the cables or the
speakers.

Speaker cables

To connect the speakers, use the enclosed cables or
equivalent, two-core speaker cable with a diameter of at
least 0.75 mm
. You can order these cables and banana
2
10
• Impaq 6000
plugs in our webshop (www.teufel.eu) in the "Accesso-
ries" area.
The connector terminals 32–36 "SPEAKER OUT" for the
fi ve speakers front/rear left and right and front center are
located on the back of the active subwoofer.
The terminals are each marked in red (+) and black (-).
Make sure the polarity is correct!
Connect the like-coloured terminals with one
another. Otherwise, the sound quality will
suffer. The wires of the speaker cable are marked with
different colours or shapes.

Advertisement

Table of Contents
loading

Table of Contents