Connection - Teufel Concept S Series Technical Specifications And Operating Instructions

Connecting the speakers to an
AV surround receiver;
based on 5.1 configuration.
A 6.1/7.1 receiver has
one or two rear centre
socket pair(s).
Information:
The five passive speakers in the
set – no matter whether they
are the satellite FCRs or column
FRs – are equipped with the
same speaker chassis and are
technically identical; the column
speakers simply have an inte-
grated base that can be ignored
acoustically.
The speakers can be used in the
front, centre or rear depending
on the room requirements. We do
however recommend that they
are used in pairs – for example
both column speakers TOGETHER
either for front OR rear sound.
12
· Concept S

Connection

In the 5.1 configuration (with an active subwoof-
er), the Concept S can be connected to any nor-
mal Dolby Digital/DTS 5.1/6.1/7.1 AV receiver. For a
6.1/7.1 AV receiver you do not use the rear centre
socket(s). To get the full performance benefit
from 6.1 AV receiver, you will need an additional
Concept S FCR satellite (see Page 7).
If you already own a modern 7.1 AV receiver, you
can expand your Concept S with two additional
FR column speakers or FR satellites to make a 7.1
home cinema set.
Connect the front, centre and rear speakers to a
5.1 AV receiver as shown in the illustration. ĕFig.
1
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS-AV receiver via a mono-cinch
cable with the right Line Input of the subwoofer
as shown in the illustration. ĕFig. 2
The left input (Line Input L) remains unoccupied.
A Y-adapter is required to use both of the sub-
woofer inputs (refer to Accessories, page 7).
Concept S FR
Front speaker
left
R
Input
Subwoofer cinch input
Mono-Cinchkabel
-
+
Concept S FCR
Rear speaker
left
1. Front, centre and rear speakers
AV receiver
Speaker output
2. Subwoofer
AV receiver
Concept S FCR
Centre speaker
Concept S
Active
subwoofer
Lautsprecherkabel
Sub out Center
+ -
Front rechts
Front links
AV-Receiver
Rear links Rear rechts
- + - +
Teufel
Connection field
Cinch output Cinch input
Sub out
Concept S FR
Front speaker
right
+
-
Concept S FCR
Rear speaker
right
Input R
Subwoofer