Screen Displays - Canon XL 1s Instruction Manual

Screen Displays

To display the date and time on a connected TV,
E
press the wireless controller's DATA CODE button
when the camera is in VCR mode with a tape
loaded.
Press the wireless controller's ON SCREEN button
to see the other displays on the TV screen. (The
displays appear white on-screen.) They will not be
added to any recordings you make with the camera.
indicates a flashing display.
Record pause mode (p. 35)
Recording (p. 35)
The backup battery is not
properly installed, or needs
replacing (p. 99).
Shows how much battery power
remains (p. 98).
The battery pack is exhausted
(p. 20, 98).
No cassette is loaded, or it is set
for erasure prevention (p. 23).
Remaining tape
(Green: more than 5 mins.
Yellow: less than 5 mins.
Red: final few secs).
...finally, it tells you when you
have completely run out of tape.
114
ON SCREEN
The camera is ejecting the tape
PAUSE
(p. 22).
The safety mechanism is
REC
activated. Unload the cassette
and turn the camera off. Turn it
on again and reload the cassette.
Recording mode (p. 37)
Playback is stopped (p. 76).
Normal playback (p. 76)
Fast forward (p. 76)
Rewind (p. 76)
Fast forward playback
(p. 77)
Rewind playback (p. 77)
5 min
Frame advance playback
(p. 78)
Frame reverse playback (p. 78)
E N D
DATA CODE
E J ECT
E J ECT
S P
S TOP
F F
REW