Canon XL 1s Instruction Manual page 31

Turning off the remote sensors
The remote sensors can be turned off to prevent interference from other Canon wireless controllers being
used nearby.
SYSTEM
(see p. 27)
1. Open either the camera menu or the VCR menu, and select SYSTEM.
2. Select SENSOR, then select OFF setting.
3. Close the menu.
• B appears in the viewfinder.
Turning off the tally lamps
The tally lamps let you know that the camera is
recording. However, the flashing of the front lamp
may be reflected into the lens during close-up
recording, or when recording through glass.
You may therefore decide to turn them off.
SYSTEM
(see p. 27)
1. Open the camera menu and select SYSTEM.
2. Select TALLY LAMP, then select OFF setting.
3. Close the menu.
• The tally lamps no longer flash during recording, but they will still light up when the camera receives
a signal from the wireless controller.
SENSOR•••••• OFF
TALLY LAMP•• OFF
E
31