Adjusting The Color Viewfinder Unit - Canon XL 1s Instruction Manual

Adjusting the Color Viewfinder Unit

Adjusting for left eye/right eye operation
E
You can slide the viewfinder unit along the bracket
to a position that best suits you — for use with
either the left or right eye.
1. Loosen the locking screw and slide the
unit to the position you require along the
bracket.
2. Tighten the locking screw.
3. Switch the eye cup around (if necessary).
• Slide and hold the release lever on the
underside of the viewfinder and then twist the
eye cup counter-clockwise (until the mark on
the eye cup lines up with the mark on the
viewfinder) to allow you to remove it from the
viewfinder. Replace, with the eye cup facing
the opposite direction, by lining up the marks
and twisting the cup clockwise until it locks
into place.
16
1, 2
3
Right eye use Left eye use