Protecting Images - Canon MV930 Instruction Manual

Protecting Images

You can protect important images from accidental erasure when displaying a single image
or index screen.
If a memory card is initialized, all still images and movies, even protected ones,
will be erased permanently.
Movies can only be protected when the first scene is displayed as a still image.
MENU
( 36)
1. Select the image you wish to protect.
2. Open the FUNC. menu and select (
In
FUNC. button while reviewing a still image immediately after recording it.
3. Set ( ) it to [PROTECT ON], press (
• " " appears and now the image cannot be erased.
• To cancel the protection, repeat the operation and select [PROTECT OFF].
Protecting in Index Screen Display
MENU
( 36)
1. Move the zoom lever toward W.
• Up to 6 images appear.
• Select the image you wish to protect.
2. Open the setup menus, select the [CARD OPERATIONS] menu and
press (
Pressing the FUNC. button from the index screen will open the menu directly in the
setup menus screen.
3. Select (
4. Select (
• " " appears on the image.
• To cancel the protection, (
5. Close the menu.
94
PROTECT OFF
mode: The image protect menu appears only when you press the
CARD OPERATIONS
).
) the [ PROTECT] option and press (
, ) the image you want to protect and press (
) again.
) the image protection icon.
) and close the menu.
PROTECT
).
).