Playing Back A Tape - Canon MV930 Instruction Manual

Playing Back a Tape

Playback
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
1. Set the camcorder to
mode.
Set the switch to PLAY and the
TAPE/CARD switch to
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing out.
3. If the joystick guide does not
appear on screen, press (
display it.
4. Push the joystick (
to rewind the tape.
5. Push the joystick (
to play back the tape.
Push ( ) again to pause the playback.
6. Push the joystick (
to stop the playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
.
) to
) towards
) towards /
) towards
Joystick
E
114).
29