Recording From A Tape In The Camcorder; Recording From Other Video Devices - Canon MV930 Instruction Manual

Recording from a Tape in the Camcorder

1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The CARD access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
You can record as still images on the memory card scenes captured from external video
devices connected through the DV terminal.
to digital conversion to input video through the AV terminal. For connecting instructions,
refer to pages 32 and 70.
1. Set the camcorder to
• If a cassette is loaded, make sure that the tape is stopped.
• When recording via the AV terminal, make sure that "AV
displayed on the screen. When recording via the DV terminal, make sure that
"AV DV" is not displayed. Change the setting as necessary (
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
4. Press the PHOTO button fully.
The CARD access indicator flashes.
When recording from a tape in the camcorder or other video devices:
- A still image recorded from an image in widescreen mode will be vertically
compressed.
- The data code of the still image will reflect the date and time it has been
recorded on the memory card.
- The size of the still image will be S 640 x 480.
When connecting with a DV cable, make sure that no USB cable is connected
to the camcorder.

Recording from Other Video Devices

mode.
only: you can also use the analog
DV" is
76).
E
87