Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
Reflective
surfaces
1. Set the program selector to
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. If the joystick guide does not appear on screen,
press (
4. Push the joystick (
the manual focus.
[FOCUS] on the joystick guide will be displayed in light blue and "MF" appears on the
screen.
5. Adjust (
• Push the joystick (
for a closer focal distance.
46
Subjects with low
contrast or without
vertical lines
Joystick
) to display it.
) towards [FOCUS] to activate
) the focus as necessary.
) towards
Through dirty or
Fast Moving
wet windows
Subjects
.
for a farther focal distance or push it (
Night Scenes
Program selector
Zoom lever
BACK
FOCUS
) towards