Table of Contents
Advertisement
• Install the device in the desired place.
• Insert the wires and sockets (RJ11 connectors) into their recesses.
• After installation, turn on the machine.
Receiving a sound tele call
While the phone rings, pick up the handset or press the speaker button
Making phone calls.
The call can be done as follows:
- Pick up the handset and dial the phone number
- I press the button and then select the
- Select the number (if necessary, delete the incorrect digits using the [Del] key), and then press
the receiver (pre-dial - Pre-Dial).
After about 8 seconds the approximate duration of the call will be blessed.
After dialing, put the receiver in the device or press the button
format number is stored in the call book.
Setting the PULSE/TONE dialing mode
The device is factory set by default to tone, which works in the vast majority of telephone exchanges.
To change the Pulse or Tone dial mode:
Press and
hold, on the LCD screen will display P - for pulse dialing, T - for tone call. Press [SET] to confirm
the setting.
Select and set the call tone volume
The camera has 16 ringtones, 8 volume levels and the ability to disable the ringtone.
You can change the ringtone song by pressing [RING]. The screen will display "rin9 0X dB" (where x = ringtone, Y
= volume). Press the [Ring] button again for the desired ringtone. To adjust the ringer volume, use the KEYS
[UP/DOWN. To stop the doorbell, press [RING], until the screen will appear
by pressing [SET].
Set the date and time
With the phone in the fork, press [SET], the LCD screen will display the DATA SET1, press the [SET] button. On the
screen will blink the position of the current year:
• Set the year – press the keys [up] or [down] to set the current year, press [SET] to confirm and enter the following
setting.
• Set the month - by pressing [up] or [down / -] to set the current month: press [SET] to confirm and enter the
following setting
• Set the day – by pressing [up] or [down] to set the current day of the month: press [SET] to confirm and enter the
following setting
• Set the time - by pressing [up] or [down], set the first digit for the current time, confirm with [SET], in analog
mode continue to set the position of the second digit and confirm by pressing [SET] • Set minutes - by pressing
[up] or [down] set the minutes and confirm by pressing [SET]
• Complete the settings by pressing the [Del] key.
phone number.
. The
5
to answer the call.
Confirm the selected setting
"rin9 off".
or pick up
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KXT-709 and is the answer not in the manual?
Questions and answers
Cannot get the KXT709 to work
@David Is there a video for setting up KXT709
To troubleshoot the Maxcom KXT-709 and get it to work, follow these steps:
1. No sound: Ensure the phone line is properly plugged into the correct slot.
2. Cannot make calls:
- Check if the dialing mode is set correctly (Pulse or Tone).
- Ensure the “Call Baby” Interference function is not enabled.
- Inspect the cables for damage and confirm the plug is securely connected.
3. Dark or unreadable display: Adjust the screen contrast or replace the batteries.
4. No ring tone when receiving calls: Make sure the doorbell (ringer) is properly seated.
5. Most functions not working: Check if the batteries are fully charged or need replacing.
6. General safety:
- Avoid moisture and extreme temperatures.
- Do not insert objects into the device.
- Do not open or attempt to repair the device yourself.
If problems persist, consult a specialized service technician.
This answer is automatically generated