Frame Function - Brother P-Touch 2400 User Manual

With the Frame function, you can choose from various frames and highlights to make more
decorative or emphasized text.
The following frame settings are available:
OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE, DOG, MOVIE FILM, DINO-
SAUR, TELEPHONE, HANDS, WINDOW, BANNER, DOT, DIAMOND, and SLANT
The default frame setting is OFF; however, 15 other settings are also available. When any set-
ting other than OFF is selected, the Undl/Frm indicator on the right side of the display lights
up.
Refer to Reference at the end of this section for samples of the available settings.
To change the frame setting:
1 While holding down
current frame setting.
2 While still holding down
displayed.
The Undl/Frm indicator lights up when any setting other than OFF is selected.
3 Release
Code Code
EXAMPLE
To select the BANNER frame setting:
1
While holding down
once, and keep
2
While still holding down
tinue pressing
played.
3
Release
90

FRAME FUNCTION

, press
Code Code
, continue pressing
Code Code
to apply the selected frame setting to the text.
Code Code
Code Code
Frame Frame
¢ ¢ until BANNER is dis-
6 6
.
Code Code
Frame Frame
once, and keep
¢ ¢
6 6
Frame Frame
Frame Frame
, press ¢ ¢
6 6
held down.
Caps
, con-
Code Code
Caps
held down to display the
Code Code
until the desired frame setting is
¢ ¢
6 6
Alt F R A M E
O F F
F R A M E
Alt
B A N N E R
Length Length
Undl/Frm
A.Format
Width
Length Length
Undl/Frm
A.Format
Width