Cursor Keys - Brother P-Touch 2400 User Manual

The machine's LCD display shows two rows of 11 characters; however, the text that you enter
can be up to 255 characters long. You can review and edit your text by using the cursor keys
to move the cursor so that different parts are shown in the display.
LEFT CURSOR KEY
To move the cursor one character to the left:
Press once.
If the cursor is at the beginning of a line when this key is pressed, the cursor moves
to the end of the previous line.
To move the cursor several characters to the left:
Hold down
To move the cursor to the beginning of the current line:
Hold down
To move the cursor to the beginning of the current text block:
Caps Caps
Hold down
Shift Shift
If the cursor is already at the beginning of a text block when these keys are pressed,
the cursor moves to the beginning of the previous block.
RIGHT CURSOR KEY
To move the cursor one character to the right:
Press once.
If the cursor is at the end of a line when this key is pressed, the cursor moves to the
beginning of the next line.
To move the cursor several characters to the right:
Hold down
To move the cursor to the end of the current line:
Hold down
To move the cursor to the beginning of the next text block:
Caps Caps
Hold down
Shift Shift
If the cursor is already at the beginning of the last text block when these keys are
pressed, the cursor moves to the end of the text.

CURSOR KEYS

until the cursor moves to the desired position.
and press
Code Code
and press
until the cursor moves to the desired position.
and press
Code Code
and press
.
.
.
.
47