New Block Function - Brother P-Touch 2400 User Manual

Whenever the number of lines in a section of the text changes, a new block must be created.
A single label can only contain a maximum of five blocks. If the cursor is located in the
fifth block when
BLOCK LIMIT!" appears.
If the cursor is positioned in the middle of a text block when
New Block
is pressed, the block splits into two and the character to the left of the cursor's
current position becomes the end of the block.
To add a new block:
Hold down
to indicate the end of the block.
EXAMPLE
To add a new block:
Hold down
once.
54

NEW BLOCK FUNCTION

is held down and
Code Code
New Block
and press
Code Code
and press
Code Code
New Block
once. The new block mark (
Alt
Caps
New Block
Alt
Caps
is pressed, the error message "5
is held down and
Code Code
) appears in the text
1: K ' s G a r d e n _
1: K ' s G a r d e n
1: _
Length Length
Undl/Frm
A.Format
Width
Length Length
Undl/Frm
A.Format
Width