Bluetooth" Mode; Usb" Mode - Silvercrest SSB 70 C3 Operating Instructions And Safety Instructions

•
You can use the volume buttons (29, 31) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
See the user manual for the TV set.

9.3.3 "BLUETOOTH" mode

The Bluetooth device name of the sound bar is SSB 70 C3.
If you are prompted for a PIN during the pairing process, enter "0000".
It can take a variable amount of time to establish the connection, depending on the device.
Establishing a connection
•
Press the button (15) to switch to Bluetooth mode.
After switching to Bluetooth mode, the sound bar automatically connects to a paired devices (a steady "bt" is shown on the LED display (1)) or,
if no paired device is found, automatically switches to Bluetooth pairing mode (the LED display (1) shows a flashing "bt"). If the connection to a
paired devices is lost, the device switches off after approx. 10 minutes.
•
If your playback device has not yet been paired with the sound bar, the display flashes "bt".
Start Bluetooth scanning mode on your playback device (e.g. smartphone). It should then find the sound bar under the name "SSB 70 C3".
•
•
Now establish a Bluetooth connection between your playback device and the sound bar.
•
Once a connection has been established, the LED display (1) shows "bt" and a confirmation beep sounds.
Generally, you should only have to pair once as the playback device saves the name of the sound bar. This means you do not need to pair the
devices manually when you establish the connection again.
If you wish to disconnect an existing Bluetooth pairing or switch to pairing mode, press and hold the
about 1 second.
•
Now start music playback from the source device. The sound is played back via the sound bar.
•
You can use the (16),
•
You can use the volume buttons (29, 31) to adjust the volume to your requirements.
Disconnect
The Bluetooth pairing is disconnected if ...
•
... either of the devices is switched off. A confirmation beep will sound.
•
... Bluetooth is switched off. A confirmation beep will sound.
•
... the sound bar and source device are beyond the Bluetooth range (approx. 10 metres).

9.3.4 "USB" mode

The sequence of the tracks/folders played is determined by the order in which they are copied to the USB stick.
In this mode, you can use the sound bar to play back audio files stored on a USB storage device, e.g. a USB stick. If connecting a USB hard drive, please note
that the maximum current on the sound bar's USB connection is 500 mA. Please also see the user manual for the USB hard drive.
If you want to use a hard drive as a USB playback device, use a Y-cable with a separate power supply to connect it.
Please note there can occasionally be compatibility issues between the USB storage device and the sound bar, meaning only limited functionality
is available or it may not function at all. If this happens, try a different USB storage device.
•
Connect the USB storage device to the USB port (4) on the sound bar.
•
Press the "USB" button (33) on the remote control to select this mode.
•
Use the (16), (18),
•
You can use the volume buttons (29, 31) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
(17) and (30) buttons on the remote control or your source device to control playback.
(17) and (30) buttons on the remote control to control the music tracks.
SSB 70 C3
button (15) on the remote control for
English - 23