Suzuki DF150AP Owner's Manual page 37

Time
Setting for the time indication.
Clock: setting for display/non-display of the
clock.
Press the [SET] button to select "ON" or "OFF."
12h or 24h: select 12-hour or 24-hour display.
Press the [SET] button to select "12h" or "24h."
Timezone: set the time zone.
This gauge can be set the time by entering the
time difference from the standard time (Green-
wich time). After the time difference is entered,
it is not required to enter it again.
Time can be set in the range of +14:00 from
–12:00.
Press the [SET] button to activate the input
position, and adjust the time difference using
the [ ] or [ ] button.
Press the [ ] or [
the time in 15-minute increment. Press and
hold the button to change the time continuously
by 15 minutes.
] button briefly to change
NOTE:
If the "Timezone" is not displayed, confirm the
connection of the GPS receiver.
If a GPS receiver is not installed, the screen
displays "--:--".
Position
Setting for the gauge and engine position.
Consult your authorized Suzuki marine dealer
for setting change of "Position".
Sensor Setting
Settings for various sensors.
Consult your authorized Suzuki marine dealer
for setting change of "Sensor Setting".
Tank
Setting for fuel tanks.
Consult your authorized Suzuki marine dealer
for setting change of "Tank".
37