Interpack ipg RSA 2625-TB Operations Manual & Parts List
  1. Manuals
  2. Brands
  3. Interpack Manuals
  4. Industrial Equipment
  5. ipg RSA 2625-TB
  6. Operations manual & parts list

Interpack ipg RSA 2625-TB Operations Manual & Parts List

Random semi-automatic case sealer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER
Table of Contents
RSA 2625-TB
Random Semi-Automatic
Case Sealer
For Machines Starting With Serial Number TM154 XX X XXX
For all other serial numbers, contact Customer Service @ 800-474-8273 (Menu #3)
This manual also available at
www.Intertapepolymer.com
Intertape Polymer Group © 2021
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ipg RSA 2625-TB and is the answer not in the manual?

Questions and answers

Related Manuals for Interpack ipg RSA 2625-TB

Summary of Contents for Interpack ipg RSA 2625-TB

  • Page 1 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Table of Contents RSA 2625-TB Random Semi-Automatic Case Sealer For Machines Starting With Serial Number TM154 XX X XXX For all other serial numbers, contact Customer Service @ 800-474-8273 (Menu #3) This manual also available at www.Intertapepolymer.com Intertape Polymer Group ©...
  • Page 2 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Table of Contents Table of Contents Chapter Title Page GENERAL INFORMATION ..................Revision Control ........................Technical Support ........................Replacement Parts ........................Field Service Assistance ......................Warranty ..........................Description of RSA 2625-TB Random Semi-Automatic Case Sealer........IMPORTANT SAFEGUARDS ..................
  • Page 3 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Table of Contents Chapter Title Page 4.8.1 Upper Tape Head ......................... 4.8.2 Lower Tape Head ......................... OPERATING INSTRUCTIONS ................... Operating Procedures ......................TROUBLESHOOTING ....................ILLUSTRATED_PARTS_LIST………………………………………………………………7-1...

  • Page 4: Table Of Contents

    Table of Contents RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER List of Figures Figure Name Page Figure 1-1 RSA 2625-TB Random Semi-Automatic Case Sealer ..............Figure 3-1 Machine Dimensions ........................Figure 4-1 Receiving and Handling ......................Figure 4-2 Table Leveling ..........................Figure 4-3 Control Box..........................
  • Page 5 Table of Contents RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER...
  • Page 6 Table of Contents RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER...

  • Page 7: Table 1-1 Replacement Parts

    Support is available during normal business hours (Eastern Time). PHONE: 813 621-8410 x101 • If you have a technical question that does not require an immediate response, you may contact Interpack by fax. • FAX: 813-621-8449 Technical support may also be contacted via email at the address below: EMAIL: Machsupp@itape.com...
  • Page 8 Chapter 6, Troubleshooting. Service support is available from your authorized Interpack distributor at additional cost if the problem cannot be remedied after consulting the Troubleshooting chapter of this manual.
  • Page 9 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER General Information If any part is proven defective within its warranty period, then the exclusive remedy and Intertape’s and the seller's sole obligation shall be, at Intertape’s option, to repair or replace the part, provided the defective part is returned immediately to Intertape’s factory or an authorized service station designated by Intertape.
  • Page 10 Figure 1-1 RSA 2625-TB Random Semi-Automatic Case Sealer The Interpack RSA 2625-TB Random Semi-Automatic Case Sealer Machine with ETX Tape Headsis designed to apply Intertape brand pressure sensitive case sealing tape to the top and bottom center seam of regular slotted corrugated cases.
  • Page 11 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Important Safeguards Chapter 2 IMPORTANT SAFEGUARDS 2.1 S AFETY ABEL ESCRIPTIONS There Are A Number Of Safety Labels Used On Intertape Case Sealers. The illustrated label, as shown, is attached to the Knife Guard inside the upper and lower ETX Tape Head.
  • Page 12 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Important Safeguards The label shown is attached to the control box. The label warns the service personnel to unplug the power supply before attempting any service work on the case sealer. The label shown is affixed on the “EXIT” end of the Left Hand side cover.
  • Page 13 The label shown is affixed on the side of the column. This label provides convenient safety instruction for the operator and service personnel in the operation of the Interpack Case Sealing Equipment. Note: Should any of the safety labels placed on the Case Sealer be damaged or destroyed, replacements...
  • Page 14 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Important Safeguards 2.2 E XPLANATION OF IGNAL ONSEQUENCES WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury or property damage. CAUTION: Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury or property damage.

  • Page 15: Table 2-1 Operators Skill Level

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Important Safeguards 2.3 O PERATOR KILL EVEL ESCRIPTIONS Important: The area supervisor must ensure that the operator has been properly trained on all machine functions before operating the machine. 2.3.1 Skill “A” Machine Operator This operator is trained to use the machine with the machine controls.
  • Page 16 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Important Safeguards Notes...

  • Page 17: Figure 3-1 Machine Dimensions

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Specifications Chapter 3 SPECIFICATIONS 3.1 M ACHINE IMENSIONS Figure 3-1 Machine Dimensions...
  • Page 18 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Specifications 3.2 M ACHINE PERATING ONDITIONS Always operate the machine in a dry, relatively clean environment at 40 to 105 °F (5 to 40 °C) with clean, dry cases. Machine must be set on a level surface or adjusted to operate on a level plane. Note: Machine should not be washed down or subjected to conditions causing condensation on components.

  • Page 19: Table 3-1 Case Sizes

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Specifications Size The case sealer can accommodate most cases within the size ranges listed below Standard Case Size Capacities Case Size Length Width Height Minimum 6 in. (150mm) 6 in. (150mm) 5 in. (127mm) Maximum Infinite 26 in.
  • Page 20 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures Notes...

  • Page 21: Figure 4-1 Receiving And Handling

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures Chapter 4 SET-UP PROCEDURES 4.1 R ECEIVING AND ANDLING The following instructions are presented in the order recommended for setting up and installing the RSA 2625-TB Random Semi-Automatic Case Sealer as well as for learning the operating functions and adjustments.

  • Page 22: Figure 4-2 Table Leveling

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures 4.2 T ABLE EVELING WARNING: MACHINE HEIGHT ADJUSTMENT REQUIRES RAISING THE MACHINE TO ADJUST EACH LEG. FOLLOW ALL POSSIBLE SAFETY PROCEDURES PRIOR TO AND DURING THIS PROCESS. The Case Sealer must be installed on a near level ground. Ensure that the machine is level and firmly on the ground (no rocking).

  • Page 23: Figure 4-3 Control Box

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures 4.3 I NSTALLATION OF XTERNAL EED AND ONVEYORS 1. Customer supplied in-feed conveyor (if used) should provide straight and level entry into the case sealer. 2. Customer supplied gravity exit conveyor (if used) should be straight and declined no more than 0.24 in./ft. (20mm/meter) away from the machine to convey the sealed cases away from the machine.

  • Page 24: Figure 4-4 Electrical Utilities

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures 4.5 C ONNECTING TILITIES 4.5.1 Electrical Utilities A 12 foot (3.7m) standard three conductor power cord with plug is provided for 115V, 60Hz, 15A electrical service. The servicing receptacle must be properly grounded. Before the machine is plugged into the receptacle, ensure that all materials are removed from the machine.

  • Page 25: Figure 4-5 Air Regulator

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures 4.5.2 Air Connection The regulator has a male "quick disconnect" adaptor. Connect clean dry compressed air to this adapter. The RSA2625-TB Random Semi-Automatic Case Sealer requires a minimum of 3 C.F.M. at 75 PSI maximum. To regulate the air pressure, pull on the green knob located on the side of the machine.

  • Page 26: Figure 4-6 Tape Loading

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures OADING The ETX Tape Heads accommodate 2 in. (50.8mm) wide tape rolls, while the ETX /3 in. Tape Heads accommodate 3 in. (76.2mm) wide rolls. 1. Place the tape head onto a sturdy, flat surface. 2.

  • Page 27: Figure 4-7 Tape Threading Preparation

    RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures HREADING REPARATION Threading the tape in the Tape Head does not require any special tools. Pull approximately 12 in. (304.8mm) of tape from the roll and fold in half lengthwise, adhesive side to adhesive side.
  • Page 28 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures HREADING WARNING: TURN OFF ELECTRICAL POWER SUPPLY AND DISCONNECT THE POWER CORD FROM THE ELECTRICAL SUPPLY BEFORE BEGINNING TO WORK ON THE TAPE HEADS OR TO LOAD TAPE. IF POWER CORDS ARE NOT DISCONNECTED, SEVERE INJURY TO PERSONNEL COULD RESULT.
  • Page 29 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures Notes...
  • Page 30 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures PAGE INTENTIONALLY LEFT BLANK 4-10...
  • Page 31 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Operating Instructions Chapter 5 OPERATING INSTRUCTIONS 5.1 O PERATING ROCEDURES Once the ETX Tape Heads, (both bottom and top) have been loaded with tape and threadedthe machine is ready to process RCS cases. The following instructions are presented in the order recommended for processing cases successfully through the RSA 2625-TB Case Sealing machine.
  • Page 32 RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Operating Instructions...
  • Page 33 However, should a problem occur, we recommend that you consult the following table. If the problem you encounter is not discussed in this table, call toll-free (877) 447-4832 Interpack Technical Support. Toll-free (877) 447-4832...
  • Page 34 RSA2625-TB ILLUSTRATED PARTS LIST CHAPTER 7 ILLUSTRATED PARTS LIST List Of Assemblies Section Name Page RSA2625-TB TOP LEVEL ASSEMBLY..................7-2 USM0872 – BASE ASSEMBLY....................7-3 USM0873 – COLUMN ASSEMBLY..................7-4 USM0879 – TOP BELT ASSEMBLY..................7-6 USM0411 – ELECTRIC CONTROL BOX ASSEMBLY............7-8 USM0880 – BOTTOM DRIVE ASSEMBLY................7-10 USM00878 –...

  • Page 35: Rsa2625-Tb Top Level Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.1 UMXXX – RSA2625-TB TOP LEVEL ASSEMBLY...

  • Page 36: Usm0872 - Base Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.2 USM0882 – BASE ASSEMBLY...

  • Page 37: Usm0873 - Column Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.3 USM0873 – COLUMN ASSEMBLY...
  • Page 38 ILLUSTRATED PARTS LIST RSA2625-TB...

  • Page 39: Usm0879 - Top Belt Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.4 USM0879 – TOP BELT ASSEMBLY...
  • Page 40 ILLUSTRATED PARTS LIST RSA2625-TB...

  • Page 41: Usm0411 - Electric Control Box Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.5 USM0411 – ELECTRIC CONTROL BOX ASSEMBLY...
  • Page 42 ILLUSTRATED PARTS LIST RSA2625-TB...

  • Page 43: Usm0880 - Bottom Drive Assembly

    ILLUSTRATED PARTS LIST RSA2625-TB USM0880 – BOTTOM DRIVE ASSEMBLY 7-10...
  • Page 44 RSA2625-TB ILLUSTRATED PARTS LIST 7-11...

  • Page 45: Usm00878 - Centering Mechanism

    RSA2625-TB ILLUSTRATED PARTS LIST 7.7 USM0878 – CENTERING MECHANISM 7-12...
  • Page 46 ILLUSTRATED PARTS LIST RSA2625-TB 7-13...

  • Page 47: Usm0881 - Pneumatic Control Assembly

    RSA2625-TB ILLUSTRATED PARTS LIST 7.8 USM0881 – PNEUMATIC CONTROL ASSEMBLY 7-14...
  • Page 48 ILLUSTRATED PARTS LIST RSA2625-TB 7-15...

Table of Contents