GE ACT17CWA Installation And Operation Manual page 12

Lock Settings / Fahrenheit Setting
Central/Lock Function:
Function is active only when system has a central control, such
as the YCZ-A004. This setting is activated only by the central
Control.
Central Control
Central Lock
Fahrenheit Setting and Display:
• Fahrenheit to Celsius: Adjust set temperature to lowest
15 seconds. During the 15 second count the display will
beep once at 5 seconds and display error codes. Then after
another 5 seconds, the display will beep once again and
display 00, after 5 more seconds the display will change to
Celsius.
• Celsius to Fahrenheit: Adjust set temperature to highest
seconds. During the 15 second count, the display will beep
once at 5 seconds and enter Special Functions menu. Then
after another 5 seconds, the display will show 00, after 5
more seconds the display will change to Fahrenheit.
/
No functions available.
11