Table of Contents
Advertisement
Installer Settings
Adjust ECO Parameters:
• Cooling: Power on the unit. Adjust set temperature to
86°F. Press and hold FAN and TEMP+ for 5 seconds. The
minimum allowable set temperature will be displayed in the
top right corner. Use TEMP+/- to change the parameter,
then press FAN save. The default minimum temperature is
73°F.
• Heating: Power on the unit. Adjust set temperature 60°F.
Press and hold FAN and TEMP- for 5 seconds. The
maximum allowable set temperature will be displayed in the
top right corner. Press TEMP+/- to change the parameter,
then press FAN to save. The default maximum temperature
is 79°F.
Cooling.
Child Lock:
• Press and hold TEMP+ and TEMP- for 5 seconds to
activate/deactivate the Child Lock function. When the Child
Lock function is active,
will appear.
10
Advertisement
Table of Contents
