Brewing With Pod Drawer - Bunn My Cafe MCU Owner's Manual

BREWING WITH THE POD DRAWER
1. Place soft pod or tea bag
in Pod Drawer Cavity.
Center pod or tea bag in
Drawer and gently press
the pod or tea bag fully
into the Pod Drawer cavity.
Ensure that the pod or tea
bag is fully inserted.
Note: Do not place torn
or damaged pods in Pod
Drawer.
2. Slide Pod Drawer into
Drawer Guides and push
in to lock into place.
Pod Drawer must be
locked into place before
Coffee Maker will operate.
3. Open Spin Lid on top of
Coffee Maker.
4. Using your preferred
cup or a measuring
device, fill Pour-In Bowl
with desired amount of
water (minimum 4 oz.,
maximum 14 oz.).
Note: the cup positioned
on Drip Tray and under
the Pod Drawer must be
larger than the amount of
water you pour inside.
7
5. Close Spin Lid on
top of Coffee Maker
and position cup on
Drip Tray under Pod
Drawer.
Note: be sure cup is heat
resistant.
6. For regular brew, push
the Brew Button.
For bolder brew or for
tea, push the Pulse Button
to activate the pulse
feature and then push
the Brew Button. Pulse
starts and stops the flow
of water several times
during the brew cycle and
extends the contact time
for a bolder beverage.
7. At end of brew cycle,
remove cup from
Drip Tray.
8. Remove Pod Drawer
and dispose of used pod
or tea bag.
To remove the Pod Drawer
press down on the button
located on the top of
the Pod Drawer handle
and pull Pod Drawer out
along the Drawer Guides.
Dispose of used pod or
tea bag by flipping the Pod
Drawer over to knock pod
or tea bag into a waste
container or compost bin.
Do not touch the hot pod
or tea bag.