Configuration Settings; Temperature Display And Setting - Honeywell Home RLV3150 User Manual

RLV3150

CONFIGURATION SETTINGS

Configuration switches are on the back of the faceplate. Factory settings are inside
gray cells.
#
1
Settings lock
2
Fan-forced heater
3 Unit
1. The thermostat buttons are dis-
abled and
screen (see page 1) when the set-
tings are locked.
2. Place at Fan Yes if you have a fan-
forced heater (to prevent prema-
ture burnout of the motor). Leave
at No for better temperature regu-
lation if you do not have a fan-
forced heater.
33-00209ES—05
Parameter
1
2
appears on the
Fig. 5.
Up
Lock
Fan Yes
°F
TEMPERATURE
DISPLAY AND
SETTING
The thermostat generally displays the
room temperature.
• To display the set temperature
(setpoint), press the Up or Down
button once. The setpoint
temperature will remain on the
screen for 5 seconds.
• To change the setpoint temperature,
press the Up or Down button
repeatedly until the desired
temperature is displayed.
• The screen is backlit for 10 seconds
when any button is pressed.
4
Down
Unlock
No
°C