Share Content Using An Hdmi Connection - Polycom Pano User Manual

Procedure
1. Access the Polycom Pano system on your device. On most iOS devices, the AirPlay feature is
located in the Control Center that you open by swiping up from the bottom of the device. Check
your device documentation. On the Mac, go to System Preferences and select the AirPlay display
option.
2. Select the name of the Polycom Pano system that is shown on the home screen.
3. When prompted, enter the security code shown on the Polycom Pano home screen.

Share Content Using an HDMI Connection

You can share content from a computer system or other device that is directly connected to the Polycom
Pano system using an HDMI cable.
Keep the following in mind when sharing your computer system or device:
▪ Content from your computer system or device starts sharing with the Polycom Pano system as
soon as the HDMI cable is connected.
▪ You control the audio using the volume controls on the Polycom Pano monitor or on your computer
system or device.
▪ Your computer system video output must use supported resolutions and refresh rates.
Supported HDMI Resolutions and Frame Rates
Input
UHD
OHD
FHD
WSXGA+
UXGA
SXGA
HD
XGA
SVGA
Note: Check your computer system's manual or help topics for information on configuring HDMI
resolutions and refresh rates.
Procedure
1. Connect one end of an HDMI cable to the HDMI output port on your computer system or device.
Connect the other end of the HDMI cable to the HDMI input port on the Polycom Pano system.
Polycom, Inc.
Resolution
3840 × 2160p
2560 × 1440p
1920 × 1080p
1680 × 1050
1600 × 1200
1280 × 1024
1280 × 720
1024 × 768
800 × 600
Sharing Content
Maximum Frame Rate(s)
30
60
60
60
60
60
60
60
60
9