Crock-Pot Express Owner's Manual page 23

NOTIFICATION CODES
Notification
"CLOSE Lid" blinking Ensure that the Pressure Lid is closed completely and in
light the LOCKED
Display "E1" The Cooker will stop the cooking cycle. Unplug Cooker
and contact customer service center at 1-800-323-9519.
Display "E2" The Cooker will stop the cooking cycle. Unplug Cooker
and contact customer service center at 1-800-323-9519.
Display "E3" If you receive this code while using one of the pressure
cooking settings, then the Pressure Lid probably did not
close or seal correctly. To resolve, follow the steps below:
1. Rotate the Steam Release Valve to the "Release"
position and wait for the unit to de-pressurize.
2. Take off the Pressure Lid and look underneath to make
sure the Sealing Gasket (large rubber ring) is properly
secured to the underside of the Lid.
3. If your recipe looks like it may need more liquid
now that you have released some of the steam after
removing the Pressure Lid, then add more, stir your
ingredients, and reattach the Pressure Lid, making sure
the Steam Release Valve is in the "Seal"
4. Unplug the unit for at least 5 seconds, and then re-
plug it in and re-program your cook settings to begin
cooking.
Solution
position, aligning with .
position.
-44-
NOTIFICATION CODES (CONT.)
Notification
Display "E5" This code appears when either the Pressure Lid or Steam
Release Valve is being used incorrectly for a non-pressure
cook setting. Please note that the Pressure Lid should
never be used when using the BROWN/SEAR, SAUTÉ,
or SIMMER settings. When using the Pressure Lid during
the SLOW COOK or YOGURT settings, the Steam Release
Valve must be turned to the open or "Release"
If you receive the E5 Notification during any of these
situations, then simply remove the Pressure Lid while
using BROWN/SEAR, SAUTE, and SIMMER, or correctly
position the Steam Release Valve to "Release"
using SLOW COOK or YOGURT, and then unplug the
unit for at least 5 seconds, re-plug it in and re-program
your cook settings to begin cooking.
Display "E6" If you receive this code while cooking, it means that the
Crock-Pot Express Crisp was unable to generate enough
®
steam to pressurize completely. To resolve, follow the
steps below:
1. Make sure that the Steam Release Valve is turned to the
closed or "Seal"
position, then rotate it to the correct position and jump
to step 3 below.
2. If the Steam Release Valve was in the correct position,
then turn it to the "Release"
the unit to de-pressurize. Then remove the Pressure Lid
and look underneath it to make sure the Sealing Gasket
(large rubber ring) is properly secured to the underside
of the Pressure Lid.
3. Add another cup of liquid (water, broth, etc) to the
cooking pot, stir your ingredients, and reattach the
Pressure Lid, making sure the Steam Release Valve is in
the "Seal"
4. Unplug the unit for at least 5 seconds, and then re-
plug it in and re-program your cook settings to begin
cooking.
Display "E7" The Crisping Lid will stop the cooking cycle. Unplug the
Cooker and contact customer service center at
1-800-323-9519.
Solution
position.
while
position. If it was not in the correct
position and wait for
position.
-45-