Crock-Pot Express Owner's Manual page 13

USING THE AIR FRY/CRISP FUNCTION TO CRISP FOOD
The Crisping Lid can be used to give a crisp finish to any food at the
end of cooking.
1. After releasing pressure, remove the Pressure Lid.
NOTE: If pressure cooking, first allow the unit to release pressure.
The pressure has been released when the steam is no longer
escaping from the valve, the Bobber Valve has dropped and the
Pressure Lid opens freely with minimal force.
2. Place the Crisping Lid on the Cooker by opening the Handle Covers
and connecting the Power Connection and Lid Guides into the
Cooker handles. AIR FRY/CRISP button will illuminate and display
will read "00:15" when connected properly.
3. The AIR FRY/CRISP function will automatically be selected. Use +
or - buttons to adjust time and temperature.
4. Press START/STOP. No pre-heat required.
5. The Crisping Lid will begin to heat, and the POWER and HEAT
indicator on the Crisping Lid will illuminate. The Display Screen will
show the cook time and begin to count down.
6. After the cooking time has elapsed, the Cooker will beep and
indicator lights will shut off. The Display Screen will read "dONE"
for 3 minutes and then turn off, signaling the end of cooking.
7. Remove the Crisping Lid using the Lid Handles. Place the Crisping
Lid on the Lid Cooling Rack and allow to cool for 30 minutes before
cleaning the Crisping Lid.
CAUTION: The Crisping Lid gets extremely hot. Only use the Lid
Handles to maneuver the Crisping Lid after use.
NOTE: The Cooker will not switch into any other setting when the
Crisping Lid is on the Cooker.
If the Crisping Lid is removed at any time during the cooking cycle,
the unit will beep and time remaining will blink on the Display Screen.
When the Crisping Lid is placed back on the unit, the time remaining
will stop blinking, to continue cooking press START/STOP. Should
cook time need adjustment press + or - buttons to set desired time prior
to pressing START/STOP.
-24-
USING THE AIR FRY/CRISP FUNCTION TO AIR FRY
Place the Cooker on a flat, level surface. Place Cooking Pot inside
Heating Base. Plug the Cooker into a wall outlet. The Cooker will
beep, and the Display Screen will illuminate with four dashes (- - - -).
1. Place the Reversible Cooking Rack inside the Cooking Pot using
either the high or low position (some air fry and crisping recipes
may not require using the Reversible Cooking Rack).
2. Place food on the Reversible Cooking Rack. Use low position (2
inch side on bottom) for larger foods such as a whole chicken,
brisket, etc. and use high position (4 inch side on bottom) for
small foods such as french fries, burgers, etc.
3. Place the Crisping Lid on the Cooker by opening the Handle
Covers and connecting the Power Connection and Lid Guides
into the Cooker handles. AIR FRY/CRISP button will illuminate
and display will read "00:15" when connected properly.
4. The AIR FRY/CRISP function will automatically be selected. Use
+ or - buttons to adjust time and temperature.
5. Press START/STOP. No pre-heating time is needed.
6. The Crisping Lid will begin to cook, and the POWER and HEAT
indicator on the Crisping Lid will illuminate. The Display Screen
will show the cook time and begin to count down.
7. After the cooking time has elapsed, the Cooker will beep and
indicator lights will shut off. the Display Screen will read "dONE"
for 3 minutes and then turn off, signaling the end of cooking.
8. Remove the Crisping Lid using the Lid Handles. Place the Crisping
Lid on the Lid Cooling Rack and allow to cool for 30 minutes
before cleaning the Crisping Lid.
CAUTION: The Crisping Lid gets extremely hot. Only use the Lid
Handles to maneuver the Crisping Lid after use.
NOTE: The Cooker will not switch into any other setting when
the Crisping Lid is on the Cooker.
If the Crisping Lid is removed at any time during the cooking cycle, the unit
will beep and time remaining will blink on the Display Screen. When the
Crisping Lid is placed back on the unit, the time remaining will stop blinking,
to continue cooking press START/STOP. Should cook time need adjustment
press + or - buttons to set desired time prior to pressing START/STOP.
-25-