Replacing The Filter Plates - Inficon HLD6000 Translation Of The Original Operating Instructions

INFICON
8 Maintenance
8.1 Basic unit

8.1.1 Replacing the filter plates

HLD6000-Operating-instructions-kinb43en1-05-(2107)
Carry out maintenance work on the device in accordance with the following
description.
DANGER
Life threatening hazard from electric shock
High voltages are inside the device. Touching parts where electrical voltage is present
can result in death.
► Disconnect the device from the power supply prior to any maintenance work.
► Ensure that the electrical supply cannot be switched back on unintentionally.
A Phillips-tip screwdriver is needed for some maintenance work.
Spare filter plates
Required tools
Two filter plates on the base of the device filter dust out of the sucked-in air. If the
filters are not replaced regularly then they become clogged. Functioning filters are
required to cool the device.
For this reason, check the filter plates frequently for dirt.
Order no. 200 005 506
Screwdriver
Maintenance | 8
71 / 90