Toshiba E-STUDIO2010AC Operator's Manual page 11

2.TopAccess
Item name
5 NetBIOS Name
You can enter only alphanumerical characters and "-" (a hyphen) for NetBIOS names. If you use any other
characters, a warning message will be displayed.
6 Logon
For workgroup and domain names, you can use only alphanumerical characters and symbols other than the
following:
; : " < > + = \ | ? , * #
If you use any other characters, a warning message will be displayed.
7 Primary Domain Controller
8 Backup Domain Controller
If the wrong primary or backup domain controller is specified, the NETWORK INITIALIZING message will be
displayed for up to 4 minutes while the equipment searches for the primary or backup domain controller. In
that case, correct the primary or backup domain controller setting after the NETWORK INITIALIZING message
disappears.
9 Logon User Name
10 Password
11 Primary WINS Server
When the [Obtain a WINS Server Address automatically] option is enabled in the TCP/IP settings, the primary
and secondary WINS server address can be obtained using the DHCP server.
Enter the NetBIOS name of this equipment. The equipment uses "MFP<NIC
Serial Number>" as the default NetBIOS name.
Enter the workgroup or domain that this equipment joins.
 Workgroup — To include the equipment in the workgroup, enter the
workgroup name. All client computers can access this equipment without a
user name and password.
 Domain — Select this and enter the domain name when the equipment will
log on in the domain. Any client computers which are not members of the
domain will need a valid user name and password to access this
equipment. Use this to enhance access security to this equipment.
Specify the server name or IP address of the primary domain controller when
this equipment will log on the domain network. You can enter up to 128
alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash).
Specify the server name or IP address of the backup domain controller when
this equipment will log on the domain network, if required. If the Primary
Domain Controller is unavailable, the Backup Domain Controller will be used
to log on. You can enter up to 128 alphanumerical characters and symbols
other than =, ; (semicolon), #, and \ (backslash).
Enter a valid user name to log on to the specified domain. You can enter up to
128 alphanumerical characters and symbols other than " / \ [ ] : ; | = , + * ? < >.
Enter the password for the specified log on user name to log on the domain
network. You can enter up to 128 alphanumerical characters.
Specify the IP address of the primary WINS server when the WINS server is
used to provide the NetBIOS name in your local area network. This option
would be more useful to access this equipment using the NetBIOS Name from
a different subnet.
Description
[Administration] Tab 11