Danfoss ICM Installation, Programming, And Trouble-Shooting page 7

ICM/ICAD Motorized Valve
Wiring diagram showing ICAD wired with
a digital input for ON/OFF solenoid valve
operation
Note:
The ICAD motor can be programmed to
open or close when the relay is closed.
See parameter ¡09 in programming
section.
Wiring diagram showing ICAD digital
outputs wired with customer supplied
auxiliary relays
Note:
The same 24 Vd.c. power supply that
powers the ICAD can be used with the
ICAD digital outputs to power auxiliary
relays (or other small load devices), but
please note that the system will no
longer be galvanically isolated.
 Danfoss (USCO / MKS), 11 - 006
Installation, Programming, and Troubleshooting
Terminal box is customer supplied.
Terminal box is customer supplied. Terminal Box
DKRCI.EI.HT0.A1. / 50H1639
Pink
Relay
Yellow
White
Brown
Green
Auxillary relays
K K K
1 2 3
White
Brown
Green
Yellow
K K
1 1
Optional UPS/
+
White
battery back up
Brown
Green
+ Optional UPS/battery
back up
24 V d.c
+
Power
-
Supply
CUSTOMER SUPPLIED
5-24 V d.c
+
Power
-
Supply
K K K K
2 2 3 3
K1 : Common Alarm
K2 : ICM fully open
K3 : ICM fully closed
24 V d.c
+
Power
-
Supply
CUSTOMER SUPPLIED
7