Zanussi ZOD35802XK User Manual page 22

Step 1 Turn off the oven and wait until it
is cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
HOW TO USE: CATALYTIC CLEANING
The cavity is coated with catalytic enamel. It
absorbs fat during catalysis.
Turn off the oven and wait until
it is cold.
Step 1
HOW TO REMOVE AND INSTALL: DOOR
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
WARNING! The door is heavy.
22
Before the catalytic cleaning
Remove all accessories and re-
movable shelf supports.
Clean the oven with catalytic cleaning
Step 2
Set the maximum
oven temperature.
Duration: 1 h
1
Spots or discolouration of the catalytic coating
have no effect on the cleaning.
Clean the oven floor and the
inner door glass with warm wa-
ter, soft cloth and mild deter-
Step 3
After cleaning, turn
the knob for the
oven functions to the
off position.
CAUTION! Carefully handle the glass,
especially around the edges of the
front panel. The glass can break.
2
gent.
Step 4
When the oven is
cold, clean the cavi-
ty with a wet soft
cloth.