Table of Contents
Advertisement
2 Introduction
Page 5 / 44
2 Introduction
Thank you very much for your interest in our product VisionCam XM.
The purpose of this description is to provide as much information as possible about the
VisionCam XM. How should the connectors and plugs be connected? What is needed in
the periphery? These and other questions will be answered here. Should you have other
unanswered questions, do not hesitate to contact us via phone, fax or email.
The VisionCam XM is a specific smart camera derived from the VisionBox AGE-X series.
Therefore, the software library or exactly the API is identical to the VisionBox AGE-X. It's
possible to develop one program which runs on an i7 AGE-X and on the VisionCam XM,
with only a simple rebuild.
The heart of the VisionCam XM is a very powerful dual core ARM Cortex-A15 which
brings your application to the next level. We deliver the camera with a modern Debian
based OS, which gives the customer the capabilities to use the poplar Linux programs/li-
braries, and at the moment Debian contains more than 40.000 packets! So, the customer
is able to use even very rare libraries in the same easy way.
The development for/on the VisionCam XM is identical to a normal x86 PC. It's not neces-
sary to learn new skills.
Inside the VisionCam XM, there is a powerful and easily configurable RTCC (Real-Time
Communication Controller). This makes it possible to work/produce with signals without
any influence of the OS. For more details about what is possible, please have a look into
the software documentation.
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611; Fax +49(0)6031-6842612
info@imago-technologies.com; www.imago-technologies.com
Advertisement
Table of Contents
