Handling And Safety Instructions - IMAGO VisionCam XM Hardware Manual

Hide thumbs Also See for VisionCam XM:
Table of Contents

Advertisement

1 Handling and Safety Instructions

1 Handling and Safety Instructions
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611; Fax +49(0)6031-6842612
Depending on the operating conditions, the housing temperature
can exceed 60 °C. There is a risk of injury!
Electrical installation should be executed without power applied to the de-
vice and connected devices.
EMC conformity according to EN/IEC 61000-6-2:2005 is qualified for cable
lengths ≤ 30 m.
Only open the housing if advised by IMAGO!
➔ Warranty void if product is opened without authorization by IMAGO.
Please take special note of the voltage range which may be applied
to the device. Otherwise, permanent damage to the device may re-
sult!
Due to the characteristics and physical principles inside flash
memory, memory cards have a finite lifetime dictated by the num-
ber of write operations.
Therefore, take care of the regular write operations to prevent an
early flash damage.
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 4 / 44

Advertisement

Table of Contents
loading

Table of Contents