Table of Contents
Advertisement
3
將1號操縱桿推到中間位置
Set the "Lever Controller 1 " in the middle as below
1
操縱桿
Lever Controller
4
操作2~6號操縱桿(參考77頁)使吸盤移動到物件
Operate the lever Controllers 2-6 (refer to page. 77), and have suction cup target the object.
吸盤
Sucton Cup
物件
Object
為得到最好效果，物件須放在平整表面，尺
寸大於吸盤且重量在50克以內
To obtain the best results, put suction objects
on a smooth surface； suction objects bigger
than the suction cup, and max.50 g
1
確認吸盤有緊緊的壓在物件上
Make suction cup stick to the object tightly.
82
夾頭組須垂直於物件
Direct the Wrist to the object straightly
手腕
Wrist
90°
5
將操縱桿1往後拉，使吸盤吸附在物件上
Pull "Lever Controller 1" backward as below, and have the cup suck the object.
83
Advertisement
Table of Contents
