Table of Contents
Advertisement
一提到陀螺，你會想到什麼?是...圓圓的小東西在地上打轉? 這個答案不算錯，但其實還有更多可能!這款陀螺機器人可重複拼裝、拆解、再拼裝成
6種不同造型，每款造型遊戲難度不一，將陀螺遊戲提升到另一新境界! 從基本的將陀螺穩定在尖塔上旋轉，到高難度的把陀螺小子平衡在"雲霄飛車"
軌道上並跑完全程，每一關都再再挑戰你的技巧，同時也將陀螺儀的基本概念潛移默化進你的知識庫裡。
What comes up to your mind when you think about spinning top? A round-shaped object spinning a long time on the ground? Yes, it
could be right, but it can be something more fascinating! The 6-in-1 gyroscope experimental kit offers you a total of 6 brand new ideas,
taking the spinning top game to a whole new level. From stage 1- keep the spinning top rotating without falling down from the tower, to
stage 6- lead and secure the little guy finishing a long track in the 3D world, you will not only have a lot of fun challenging your
techniques, but also learning the gyroscopic basic physics, such as rotation, precession, nutation, and inertia at the same time. The
environment-friendly kit needs no batteries at all. By pulling the rip cord, you can easily power and accelerate it. The kit can be dissembled
and reassembled into 6 different styles.
1.本玩具內含小物件，請勿讓三歲以下孩童取得，以免放入口中造成窒息。
Choking hazard - Small parts. Not for children under 3 years.
2.兒童使用剪切工具時，請家長指導使用方式，並請在家長監督下使用，以免發生意外。
Adult supervision is recommended when children use scissors.
警 告
3.為避免嬰兒或兒童產生窒息的危險，請於拆卸後立即將塑膠袋銷毀或遠離嬰兒及兒童。
Warning
To avoid danger of suffocation, keep the plastic bag away from babies and children.
Diagonal Cutter 斜口鉗
#推薦寶工PM-201/PM-202
Tissue Paper 衛生紙
部分產品含有銳利邊、角，組裝時請特別注意
Product contains functional edges and sharp points.
Eyelet
P1
雞眼圈
Gear 48/18T (White)
P5
齒輪(白色)
六合一搖擺陀螺
產品介紹 Product Introduction
自備工具 Tools You May Need
Hammer 鎚子
Tape 膠帶
零件清單 Mechanical Parts List
Pinion Gear (White)
P2
小齒輪(白色)
2 pcs
P6
1 pc
6 in 1 Gyroscope Kit
Screwdriver 螺絲起子
推薦尺寸
Recommended Size
4~5 mm
Gear 24T (Red)
P3
齒輪(紅色)
5 pcs
Tapping Screw
機械螺絲
14 pcs
1:1
1
Cup 杯子
PH#1
Rope 棉繩
≦1.5mm
Gear 40/10T (Green)
P4
齒輪(綠色)
1 pc
Hex Shaft
P7
六角軸
1:1
3 pcs
1 pc
Advertisement
Table of Contents
