TAWI Mobile Order Picker User Manual page 29

Elevate the unit approximately 200 mm.
3.
Open the access hatch.
4.
Remove the power pack quick change
5.
support legs (h) from the unit and reattach
them to the access hatch, make sure the
power pack is secured to the unit and will
not come lose.
Reinstall the front covers (i) to the unit.
6.
Retract the stabilisers (j) by pressing the
7.
transport mode button on control panel.
The unit is now operational.
8.
• If front covers are not propperly installed, the retraction of stabilerer legs will be deactivated.
USER INSTRUCTIONS• 5
h
h
i
j
29