Table of Contents
Advertisement
5 • USER INSTRUCTIONS
Disconnect the main battery cable (d)
7.
from the power pack (e).
Grab end of fork members by hand and
8.
wiggle the pack from side to side to pull
the pack out appr. 100 mm.
Raise the power pack slightly by using a
9.
fork lift or pallet jack.
Grab power pack by the front plate and
10.
pull it straight out.
Raise the power pack (g) to the correct
1.
height and then push it straight in, make
sure the power pack (g) gets fully seated in
the unit.
Reconnect the main battery cable (f) to the
2.
power pack (g).
• If main power cable is not dissconnected before trying to remove battery pack this can casue
connector to break and cause electrical shock.
• When front leg covers are removed retraction of stabiliser legs will be deactivated. This is to
prevent unit to be lowerd and tilted backwards by misstake.
• for more instructions see the movie: https://www.youtube.com/watch?v=etmCOxBJ9Oo
28
d
e
f
g
Advertisement
Table of Contents
