TAWI Mobile Order Picker User Manual page 26

5 • USER INSTRUCTIONS
• A damaged power cord could cause electrical shock.
• Never touch any parts inside the battery pack when charging. Touching electrical parts can cause
an electric shock.
• Never move unit while charger is connected to unit.
• If an external DC power source is applied, verify that it is compatible with the electrical
requirements of the lifter.
• The lifter can be switched on or off when charging the battery. It is recommended that the lifter is
switched off.
• To make sure not to damage the cord when pulling it out of the electrical outlet – apply the force at
the head of the plug.
• It is recommended to charge the battery in a full cycle, however the battery system can be plugged
in for a longer period, since it cannot be overcharged.
• Unit can be operated with charger plugged in. Note that charger will not generate enough power
only to run the unit.
• The battery system has to be charged in a grounded electrical outlet.
• Charge the battery in a designated dry area.
• Normal charging of the battery creates very small amounts of hydrogen. However, the casing is
ventilated, and thereby the risk of hydrogen collection is minimal.
• When the battery is charged, unplug the power cord between the battery and the charger.
• See the external battery charger manual provided before charging the battery.
26