Handling And Using Media - Brother MFC-235C User Manual

Handling and using media

Store paper in its original packaging, and
keep it sealed. Keep the paper flat and away
from moisture, direct sunlight and heat.
The coated side of photo paper is shiny.
Avoid touching the shiny (coated) side.
Load photo paper with the shiny side
facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
Improper Setup
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
1 2 mm or longer
• Extremely shiny or highly textured paper
• Paper already printed on by a printer
• Paper that cannot be arranged uniformly
when stacked
• Paper made with a short grain
2
1
Loading documents and paper
Paper capacity of the output paper
tray
Up to 50 sheets of 80 gsm A4 or 20 lb Letter
paper.
Transparencies or photo paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
2
2
9